American Bass Phantom Amps

PH 1600 MD
Micro Size Amp!
Class D Mono Block
1600 Watts, 800 RMS @ 1 Ohm


PH 2500 MD
Class D Mono Block
2500 Watts, 1250 Watts RMS @ 1 Ohm


PH 4000 MD
Class D Mono Block
4000 Watts, 200 Watts RMS @ 1 Ohm

HD 1500

1500 Watt Mono Block
1 Ohm Stable
750 Watts RMS

HD 2500

2500 Watt Mono Block
1 Ohm Stable
1250 Watts RMS

HD 3500

3500 Watt Mono Block
1 Ohm Stable
1750 Watts RMS

VFL

VFL80.1
1600 Watt Class D Mono Block
1600 Watt Class D Mono Block
1 Ohm Stable
Remote Sub Control
Bass Boost & Linkable


VFL100.1
2000 Watt Class D Mono Block
2000 Watt Class D Mono Block
1 Ohm Stable
Remote Sub Control
Bass Boost & Linkable


VFL120.1
2800 Watt Class D Mono Block
2800 Watt Class D Mono Block
1 Ohm Stable
Remote Sub Control
Bass Boost & Linkable


VFL150.1
5800 Watt Class D Mono Block
4000 Watt Class D Mono Block
1 Ohm Stable
Remote Sub Control
Bass Boost & Linkable


VFL160.4
480 Watt 4 Channel
True RMS Power
480 Watt True Power!
2 Ohm Stable
Remote Sub Control
Bass Boost


VFL 175.1
6600 Watt Class D
Class D Mono Block
1 Ohm Stable
Remote Sub Control
Bass Boost & Linkable


VFL200.1
6000 Watt Class D
Class D Mono Block
1 Ohm Stable
Remote Sub Control
Bass Boost & Linkable


VFL400.1
9200 Watt Class D
Class D Mono Block
1 Ohm Stable
Remote Sub Control
Bass Boost & Linkable


VFL500.1
13,000 Watt Class D
Watt Class D Mono Block
1 Ohm Stable
Remote Sub Control
Bass Boost & Linkable

VFL1000.1

11,000 Watt Mono Amp
14.4 11200 Watt @2 OHM RMS

18 V 15000 Watt @ 2 OHM RMS

N2 -800 WATTS RMS Mono Block Amplifier

Weight 7.00 Pounds RMS Power 800 x 1 PEAK Power 1600 x 1 RMS@2Ohms 400 x 1 Bridged RMS N/A Min Impedance 1 Ohm Min Impedance Bridged N/A THD >1% S/N 100dB Max Voltage 15v Max RCA Voltage 5v Freq. Responce 10HZ-220HZ Dimensions 7.2" x 5.5" x 2.1" Bass Remote optional

N3 -1400 WATTS RMS Mono Block Amplifier

Weight 10.00 Pounds RMS Power 1400 x 1 PEAK Power 2800 x 1 RMS@2Ohms 700 x 1 Bridged RMS N/A Min Impedance 1 Ohm Min Impedance Bridged N/A THD >1% S/N 100dB Max Voltage 15v Max RCA Voltage 5v Freq. Responce 10HZ-220HZ Dimensions 10.3" x 5.5" x 2.1" Bass Remote optional

N4 -2000 WATTS RMS Mono Block Amplifier

Weight 12.00 Pounds RMS Power 2000 x 1 PEAK Power 4000 x 1 RMS@2Ohms 1000 x 1 Bridged RMS N/A Min Impedance 1 Ohm Min Impedance Bridged N/A THD >1% S/N 100dB Max Voltage 15v Max RCA Voltage 5v Freq. Responce 10HZ-220HZ Dimensions 13.4" x 5.5" x 2.1" Bass Remote optional

POWER ACOUSTIK BAMF2200/2

BAMF Series 2200W Max 2-Channel Class AB Amplifier
RMS Power Rating:

4 ohms: 370 watts x 2 chan.
2 ohms: 450 watts x 2 chan.
Bridged, 4 ohms: 900 watts x 1 chan.

Max power output: 2200 watts
MOSFET power supply
Wired remote bass level control included
Power and Protection LED power indicators
Adjustable Tuned Bass EQ (0-12 dB Bass Boost)
PWM Circuitry
Full Selectable Crossover (HI,Full,Low)
Three-way protection circuit
2-Ohm Stable stereo
Tri-mode capable
System Distress Indicator
Die-cast aluminum heat sink designed for massive heat dissipation from three sides of the amplifier
Platinum RCA level inputs
Platinum screw terminals
Variable high-pass filter (50-500 Hz, 24 dB/octave)
Variable low-pass filter (30-250 Hz, 24 dB/octave)
Subsonic Filter: 15-50 Hz
Signal to Noise Ratio: 97 dB
Frequency response: 10-30000 Hz
Dimensions: 9-1/4"L x 15-1/4"W x 2-1/4"H
4 gauge power and ground wiring is required and recommended for installation.

Power Acoustik BAMF4000/1D

Product Identifiers
Brand Power Acoustik
Model BAMF4000/1D
MPN BAMF40001D
UPC 709483028623

Key Features
Amplifier Type Mono Channel
Channels Mono
Bridgeable Not Bridgable
RMS Power at 2 Ohms 1700 W x 1
RMS Power at 4 Ohms 1200 W x 1

Performance
Frequency Response 15 Hz - 0.15 Hz
Signal to Noise Ratio 100 dB
THD at Rated RMS Power 0.5 %

Crossover / Equalizer
Bass Boost With Bass Boost
Bass Boost Frequency 45 Hz
Low - Pass Frequency 40 Hz - 200 Hz

Technical Features
MOSFET Circuitry Yes
3 Way Ready Yes

Dimensions
Width 13.75 in.
Depth 8.25 in.
Height 2.13 in.

POWER ACOUSTIK BAMF-5500/1D

MS Power Rating:

4 Ohms: 1700 Watts x 1 Channel
2 Ohms: 2500 Watts x 1 Channel
1 Ohms: 3200 Watts x 1 Channel

Max power output: 5500 watts x 1 channel
Input Sensitivity: 200mV-6V
THD%: 0.20%
Full regulated PWM MOSFET Power Supply
Three way protection circuitry
Adjustable Tuned Bass EQ (0-18 dB Bass Boost)
Hi-Speed digital circuitry
1-Ohm Stable Class D Monoblock
Pre-Amp Outputs
Front Panel Connections & Controls
Direct Input 4 ga. Power & 8 ga. Speaker Terminals
Top Panel Status Indicators
Full selectable crossover (HI,Full,Low)
Die-cast aluminum heat sink designed for massive heat dissipation from three sides of the amplifier
Heavy duty aluminum alloy heatsink or High-density split-dome convection heat sink for extreme heat dissipation
Platinum-plated RCA level inputs
Platinum-plated screw terminals
Variable low-pass crossover filter: 40-200 Hz, 24 dB/octave
Variable subsonic crossover filter: 20-50 Hz
Variable Subwoofer Bass Boost EQ @ 45 Hz
Phase Control: 180 Degree
Remote Gain Control Included
Frequency response: 20-200 Hz
Signal to Noise Ratio: 100 dB
Fusing: (5) 40
Dimensions: 9-1/4"L x 17"W x 2-1/4"H
4-gauge power and ground wiring is required for installation

LSX1402

2 Channel MOSFET Power Amplifier
■PWM Controlled DC to DC Switching Power Supply
■Built-in Cooling fan with Chrome Grill
■2 OHM Stable Stereo
■MAX Power (@ 2 OHM): 2 x 700W
■RMS Power (@ 4 OHM): 2 x 350W
■Bridgeable and Tri-mode Capable
■Built-in Variable Low Pass Filter: 40Hz – 160Hz
■Built-in Variable High Pass Filter: 40Hz – 600Hz
■Built-in Variable Bass Boost Control: 0 ~ +18dB@45Hz
■Built-in Variable Subsonic Filter: 20Hz ~ 55Hz
■Remote bass control with backlight
■Line in / Line out RCA jack
■High level input
■LED power and protection indicators
■Channel Separation: Better than 60dB
■0.01% THD (4 OHM)
■Signal to Noise Ratio ≥ 98dB
■Speaker and Thermal Protection Circuit
■Dimensions: 14.41"(W) x 9.57"(L) x 2.76"(H)

LSX4000D

Mono Block Class D Power Amplifier
■PWM Controlled DC to DC Switching Power Supply
■Built-in Cooling fan with Chrome Grill
■1 OHM Stable
■MAX Power (@ 1 OHM): 1 x 4000W
RMS Power (@ 1 OHM): 1 x 2000W
RMS Power (@ 2 OHM): 1 x 1200W
RMS Power (@ 4 OHM): 1 x 700W
■Built-in Variable Low Pass Filter: 50Hz – 150Hz
■Built-in Variable Bass Boost Control: 0 ~ +18dB@45Hz
■Built-in Variable Subsonic Filter: 10Hz ~ 40Hz
■Remote bass control with backlight
■Line in / Line out RCA jack
■Phase Shift of Subwoofer: 0° ~ 180°
■LED power and protection indicators
■0.01% THD (4 OHM)
■Signal to Noise Ratio ≥ 98dB
■Speaker and Thermal Protection Circuit
■Dimensions: 17.17"(W) x 9.57"(L) x 2.76"(H)